Unfortunately, this is not watering at all. Please reach out to me! GCarman2000@gmail.com

Hello

How do I reset the whisperer

Thanks

I had stablished a new whispered as stand alon( I área associated). In the installation it gave me an error and now, the option to asóciate again to stand alone is not visible. Neither the whisper to be deleted.

When trying to reconnect show whisper already in my account 

Hi, anyone knows if the white lights on the hardware could be turned off? Thanks 

Hi, my sprite is offline since 14 hours and I did not receive any notification on my smartphone.

Is it correct? How can I enable notifications as soon as the sprite is offline? 

Thank you

Carlo

Hi all!

I have a “Netro Sprinkler WIFI Smart Controller” and when  sometime i have a problem with internet connection provider and  after the connection return up the controller still disconnect until i power-off and power-on the controller.

The led on controller blinking and the app show a off-line message.

 

Why Netro doesn’t automaticaly retry the connection ?

All other ethernet and wifi device automaticaly reconnect  after the connection return up.  It’s possibile configure Netro Controller to retry the wifi connection ot it’s a contoller bugs ?

 

 

Netro App vesion: 3.1.0

Netro controller hw ver.: 1.2

Netro controller firmware ver:  1.1.1

 

Thanks in advance.

Gianluca

 

At the end of the whisperer's learning time, the times are set automatically in the program or have to be done manually?

Hello, I’ve often thought it would be nice to have the ability to control my smart watering a little further by say, having a percentage adjustment? I’ve played with the settings and gone from Normal watering to Eco to Frequent but find that the differences are more distinct than I want them. Is there a way or maybe an update coming that will allow me to simply put that I want to water 70, 80 percent, etc? I could much more easily manage my water bill and usage with that handy feature. Please let me know if I’m missing it somewhere! Thanks!!

If the system lost the connection, it keeps the last schedule?

I am worry about the wstering and I am far away from home.

Thanks

Hello all!

I've just installed the Pixie smart house faucet timer and whenever I try to link the Netro service to my Google Home I get a message saying no devices can be found.

Is there some setting I need to enable to allow the device to be found by Google Home?

All the zone were off in the application but in the device the zone 5 opened the passage of current to the valve remaining opened 

Even after several hours in full sun my Whisperer looks dead and does not send any signal.

Shirt or long pushes on the button does not change anything.

I suppose that while not that old I have to buy a new one.

Thanks for your advice

It looks like the sprinklers are not jumping out because of the water pressure is maybe down right after I installed pixie

Raining hard outside for at least 20 minutes but yet, Netro weather n others didn't detect it?

My main water line to the sprinkler system came loose and flooded my vacation home yard with 250,000 gallons of water before the leak was discovered and repaired.  Does Netro have the ability to control an electric valve on this feeder line such that the main valve will only open when the irrigation system calls for water?

Good afternoon.

Sometime my controller lost the connection to the router Wi-Fi for some time ( one day or more) and then it riconnettes automatically. I don’t know why.

This morning it lost the connection , but after 10 hours it was still disconnetter. I tried to re connect it manuali, but the controller didn’t find my router. The router is very closed to the controller. When I connect my phone to the WiFi of the controller, i see “no connection”. So. Ok the controller is off line and I can’t connect it. what can I do? I already try to reset the controller turning of the elettrico power. 

I’m in the Orlando area and on Wednesday I just had hurricane Ian drop over 5” of rain on my lawn. Discover tab shows on Wednesday I had less than .3” of rainfall. I’m using the Netro weather station. Is there something I need to change or update?

I was wondering if there’s a relationship between the weather predicted on the app and the watering frequency. Here it shows daily temperature predicted at 90 degrees when in fact it’s 82 / 83 when 2 watering a week are sufficient. My app wants to water every day and unless I turn it off I don’t see a way to negotiate a more rational and way less costly rhythm. 

I set up my metro system this morning.  I made an error in programming the watering schedule.  How do I reprogram the Smart watering program?  I have been unable to do it.

Also I would like to point out that yesterday at midnight the irrigation started by itself, without having programmed anything, with the app I could not turn off I had to stattare everything through the electrical panel.
As ever this happens, should be a convenience this control unit controlled by the app instead of problems.