Hi,

why after irrigation the humidity is lower than before?

This problem only with 2nd gen sensor...

Thanks

Desde hace unos días la APP no está funcionando. Según la APP el WiFi está OFFLINE, pero según la página web está ONLINE. Según ambos está WATERING pero la realidad es que no está regando y no responde a órdenes. No dispongo en este momento de acceso físico al dispositivo. ¿Podrían indicarme si el problema es un problema local o de la APP/Web?

Hello,
I have two irrigation lines on the same garden, is there any setting that would allow these two areas to be “tied together” such that they irrigate on the same day (session)? (Obviously first one line and then the other).
Thanks

Como puedo solicitar mi estación meteorológica en wunderground a mi cuenta netro?

No me deja escribir el id de la estación ni seleccionarla.

Gracias

How do i activate a replacement Pixie and connect to existing (old) name and schedule in the app?

Hi 

I have bougth a Netro sprinkler w/o adaptor for an offer on Amazon IT.

Unfotunately i though a 24Dc adaptor would be OK but valves don't turn off while using program and manual irrigation too.

Point is that it is very hard to find an Ac Adapter 24V in our country.

Could you please help to find some place where to retrieve one?

Thanks

Buongiorno, ho alcune domande:

1)è possibile far partire solo una zona specifica attraverso i comandi vocali su google assistant?

2)è possibile aggiungere un altro meteo diverso da quelli proposti?

3)perchè quando applico il ritardo pioggia la pianificazione intelligente impazzisce e pianifica male?

grazie in anticipo delle risposte

For some time the system worked perfect. Now I  have two sections that don't work. It turns out that the signal to activate the valve is too short. When I  put a meter on it and then activate the valve the meter jumps to 28v for about one second then drops to zero before the valve can move. Conversely the one that works stays at 28v for much longer. I have rebooted and reset the system.  Any ideas?

He instalado el programador y de vez en cuando salta una de las zonas 

Hi! 

How can I share the Nero application of my watering control system with my gardener?

Thanks

Smart watering has taken over my system. It waters on the wrong days at the wrong times. I have tried and tried to reprogram it with no success. I have asked for support from Netro at least 10 times and they have no support. Can someone please help me and tell me how to program the stupid smart system? It waters my plants three days in a row and then doesn’t water it for four days. My grass is dying. My plants are dying. Everything is dying because Netro has zero support. They don’t even have helpful videos on YouTube someone please help.

My terminal 1 is not working anymore. How can I troubleshoot?

deleting plant sensor??

What is the significance of a red dot next to the green bell ? 

Do not see anything anywhere and have not received any notice.

Thanks

One day, the Sprite just stopped opening the zone valves. We tested and reconnected all the wires and deleted and re-installed the Sprite. Still no luck. Ground is good too. What could be wrong?

Much of my non-lawn landscape area is sheltered by heavy tree canopy, meaning light rain does not reach the ground in the same amount that weather apps might report. If I find that smart zones are not getting enough water, how would I tweak the zone settings?

Is there a way to view all the input settings for a given zone, to wit, soil types, slopes, species, etc? It is difficult to check the data going screen by screen. Perhaps an Export or Summary capability I have not yet discovered?

• 
  

Everything shows it should be running, but it doesn’t wake up. I have it set for online during watering periods. It says it’s communicating but it’s not running. How do I wake up metro when I want to communicate

Hello,

I have a number of zones that I would like to run for 180 minutes. Can you enable this for me?

Don