More filters

IFTTT Trigger for moisture

Kareo
Updated at 2025-04-29 04:50:52 UTC 

When I try to set the trigger for a moisture level in IFTTT, it does not give me the option to choose at what moisture % I want the trigger to run.  How do I set the trigger for a specific %?


It only gives me the option for account, device, and zone.

View: 166   Answer: 2

Broken whisperer sensor

Jesús López
Updated at 2024-09-09 16:19:33 UTC 


Hi everyone!

My Whisperer Smart Plant Sensor has broken. I would like to know if it is possible to fix it by buying a replacement part or if there is a DIY solution to reuse the device.



Thank you.

View: 1788   Answer: 2

Can you water a zone longer than 60 minutes?

dillonhueser
Updated at 2025-05-07 19:04:41 UTC 
I am limited in GPM, and in some areas of my lawn, I would like to water for more than 1 hour at a time for deep soaking. I cannot find a way without using multiple programs to the same zone. It is pretty labor intensive.
View: 56   Answer: 1

Light out on the Netro Base unit

Scott Flanigan
Updated at 2025-05-04 20:09:46 UTC 
Is there a way to replace the light?
View: 103   Answer: 1

Watering notifications in Android app

Kai Nicholson
Updated at 2025-05-04 14:12:08 UTC 

I have the Netro Whisperer2, and all works fine except for smart watering notifications.

They alert within the Netro app - how can I get them to alert outside of the app (i.e. "normal" smartphone alerts)?


It's great that I get the notification in the app, but that means that I have to constantly manually open the app to check for notifications - which essentially makes the notifications almost useless.


I've uninstalled and re-installed; I've disable the system setting to give the app access to send system notifications and then re-enabled it; and anything else I could think of that could be stopping the app being able to send a system notification.

Am I doing something wrong here, or does this intentionally only keep the notification internal to the app?

View: 120   Answer: 1

How to create a 2nd user

bdelariva
Updated at 2025-05-04 13:16:18 UTC 
How do I add a second user ( second phone) to our system?
View: 102   Answer: 1

Pixie Offline

mprtjd
Updated at 2025-05-03 15:33:15 UTC 
I received a notification on my phone that my Pixie is offline. I am out of state. Will my pixie still execute its schedule? Will it water my plants?
View: 118   Answer: 1

Batteria pixie

Max64
Updated at 2025-05-02 08:32:19 UTC 

La batteria non funziona più  è possibile averne una di ricambio? Grazie


View: 121   Answer: 1

Soil and weather

Stephen Brewer
Updated at 2025-04-29 10:06:27 UTC 
Topic: General

Hi I live in the uk and have chalk under a few inch’s of soil what setting on soil types is it most close to with you soil types and what the best weather options you have for uk weather

Regards

Steve

View: 151   Answer: 1

Discrepancia APP y WEB

JM del Amo
Updated at 2024-09-07 13:06:53 UTC 
Desde hace unos días la APP no está funcionando. Según la APP el WiFi está OFFLINE, pero según la página web está ONLINE. Según ambos está WATERING pero la realidad es que no está regando y no responde a órdenes. No dispongo en este momento de acceso físico al dispositivo. ¿Podrían indicarme si el problema es un problema local o de la APP/Web?
View: 1725   Answer: 1

Whisperer says: Sensor XXXX already in your account

Thomas Murphy
Updated at 2024-09-18 12:39:46 UTC 
Hello there!

I'm really hoping you can help me. I bought two Whisperer 2s.


I configured the first one (called Roses 1) and it works perfectly.

I configured the second one (called Office Pot Plant) and it went through the configuration fine but then doesn't appear in my app in the Sensors section (Roses 1 appears, but Office Pot Plant doesn't). 

I tried to configure it again and it told me that the name Office Pot Plant was already taken, but it doesnt show anywhere.

I tried a factory reset on the Whisperer which worked but when I tried to configure it, it gave me the error "ERROR: Sensor XXXX already in your account".  

I've looked at my account on the web and it only shows Roses 1.
So I can't add the device because it says it's there already, and I can't delete it because it doesn't appear!

Please can anyone you help? I wrote to Support yesterday (from the email for this account) but I'm hoping someone has a DIY fix for this?

Thank you so much!
View: 1625   Answer: 1

Tie the irrigation of two lines on the same garden

Francesco
Updated at 2024-09-04 07:59:17 UTC 
Topic: General
Hello,
I have two irrigation lines on the same garden, is there any setting that would allow these two areas to be “tied together” such that they irrigate on the same day (session)? (Obviously first one line and then the other).
Thanks
View: 1723   Answer: 1

Wunderground

PPL
Updated at 2024-09-02 17:42:25 UTC 

Como puedo solicitar mi estación meteorológica en wunderground a mi cuenta netro?

No me deja escribir el id de la estación ni seleccionarla.

Gracias

View: 1685   Answer: 1

Replace controller

paul.robinson@bigbend.net
Updated at 2024-08-24 22:53:15 UTC 
How do i activate a replacement Pixie and connect to existing (old) name and schedule in the app?
View: 1722   Answer: 1

Ac adaptor

Cisco -
Updated at 2024-08-24 21:45:58 UTC 

Hi 

I have bougth a Netro sprinkler w/o adaptor for an offer on Amazon IT.

Unfotunately i though a 24Dc adaptor would be OK but valves don't turn off while using program and manual irrigation too.

Point is that it is very hard to find an Ac Adapter 24V in our country.

Could you please help to find some place where to retrieve one?

Thanks

View: 1753   Answer: 1

Van Klaveren Patrick
Updated at 2024-08-15 10:04:53 UTC 
Hi! 

How can I share the Nero application of my watering control system with my gardener?

Thanks

View: 1838   Answer: 1

deleting plant sensor

David Ridgwell
Updated at 2024-08-10 01:31:44 UTC 
Topic: General
deleting plant sensor??
View: 1891   Answer: 1

Terminal 1 not working

Morgans_Home
Updated at 2024-08-12 01:27:03 UTC 
My terminal 1 is not working anymore. How can I troubleshoot?
View: 1903   Answer: 1

Smart watering very stupid

Ruth Wengert
Updated at 2024-08-13 14:22:33 UTC 
Smart watering has taken over my system. It waters on the wrong days at the wrong times. I have tried and tried to reprogram it with no success. I have asked for support from Netro at least 10 times and they have no support. Can someone please help me and tell me how to program the stupid smart system? It waters my plants three days in a row and then doesn’t water it for four days. My grass is dying. My plants are dying. Everything is dying because Netro has zero support. They don’t even have helpful videos on YouTube someone please help.
View: 1883   Answer: 1

problematiche app

Giampaolo Mariani
Updated at 2024-08-20 08:16:25 UTC 

Buongiorno, ho alcune domande:

1)è possibile far partire solo una zona specifica attraverso i comandi vocali su google assistant?

2)è possibile aggiungere un altro meteo diverso da quelli proposti?

3)perchè quando applico il ritardo pioggia la pianificazione intelligente impazzisce e pianifica male?

grazie in anticipo delle risposte

View: 1849   Answer: 1