Hello , 

I've just installed the irrigation controller  , but I have not GPS signal at my home . Now I have default position ( AL , USA) and I want to change into Italy. how can I do it ?  Thanks in advance for your help !

I have set start/end water time in preference, but it is watering outside the assigned time. Anyone else experience that, and how can I fix this?

Here is something I cannot reconcile. I am dealing with a pretty big water usage reported by the utility. It says in the month of May I used 530 GPD (gallons per day). I seem to be watering every 3 days (set by Netro).

Compared to winter months when I rarely watered the lawn due to the rainy season, it is a jump of ~ 270 GPD.

When I check the Netro app, it reports I used ~ 3.5 CCF for the month of May. 1 CCF = 748 gallons, and that translates to roughly 87 gallons per day. This is less than 1/3 of what the utility is telling me. How can this discrepancy be explained? Any ideas/tips for finding why I seem to be using this much water? Thanks in advance!

For some reason, when I give Google the command to "talk to netro sprite to water zone for 5 minutes" or "ask netro sprite to water zone for 5 minutes" Netro comes back and says "I have stopped watering.  What else can I do for you?"  It won't do anything else but turn off the zones.  Why is this?

Hi... I've set my Netro Sprite's watering "time frame" (under Settings) to be between 7 and 11pm. It still however schedules its watering start time at 6pm.  How can I fix this?

Thanks

Scheduled a one time run for a certain time in Settings->Program, but the app didn’t show the run in the schedule and the irrigation did not run either. Any idea how to set up a one time run when smart feature is enabled? Thanks 

I want to create restrictions for a set of specific days in the future.  Birthdays of family members for example. Or days that I have outdoor entertainment planned. I want to set these up long in advance (before a smart schedule has been scheduled.) How can I do this? 

How do you remove a whisperer so you can re-add it?

Anyone kows if IFTT is supported, if yes then any help with how to will be appreciated.

Thank you.

I just installed my Netro Sprite and am having fun investigating all the options. After some false steps, I was able to link it to my google home account. so, my questions:

1. When I go through google, do I always have to say "Okay, Google, talk to Netro Sprite", and then when Netro responds, give a command, such as "water zone 1 for five minutes". Is there any way such that I can say directly to google "water zone 1", and Netro will do it (like smart light switches)- I don't have to tell google to tell TP-link to turn on the bedroom light!

2. I know that Netro controls zones sequentially (only one on at a time). When I ask Netro (through google home) to water zone 1 for x minutes, it then asks "what else can I do for you". If I say "water zone 2 for x minutes, it looks like it immediately turns off zone 1, and turns on zone 2. So, does "what else" mean "instead of", rather than "in addition to" the first command? Is there any way to get it to recognize sequential zone commands?

3. I've renamed my zones in the Netro app (nice touch- always hated having to remember zone numbers with old controller. Is there any way for the Netro google link to recognize (like google home does with devices) the name of a zone? It would be great to say "water front lawn for five minutes" instead of having to remember which zone it is.

I always find cats dejections on my garden but I  cats are not mines. I had an idea to avoid these cats' gift, installing a PIR sensor connected to netro controller by wifi that transmit a signal to water garden at cats presence. Cats don't love water so they leave my garden very quickly.

Do you think you can build a sensor like this?

I.could be a beta tester ;)

All of our watering done with drip systems and I wondered if there is a way to water longer than 60 minutes for a zone?

Has anyone had a difficult time getting the device to connect? When I get to step 5 of the setup process it says the connectivity is unsuccessful. Up to that point it says all the other connections were successful. I’ve reset my router and the controller. 

Hi,

I ordered a sensor and have yet to receive it. It has been well past 4 weeks. 

Number is: 180404 ― May 17, 2019

What is the status of the order?

Thank you. 

We got our Netro two weeks ago and set up went just fine.

Yard was being watered, great.

Two days ago our power went out, came back on an hour later.

Netro light blinking slowly tried to reconect and all i get is

Internet may not be available, rest of the house is conected.

Any help would be appreciated.

Thank you

Bruce

Will this controller autoconnect to internet after an outage just like my Nest does ?

Hi, 
I am Lukas from the Netherlands. I have ordered a Netro sprite-6 on without a power adapter. 
In the Netherlands we have 230V AC on the power grid. I am having serious trouble to find a power adapter that goes to 24V AC 800mA. 

The only one I can find has an output of  24V AC 1000mA, will that be ok? 

Or is there a better alternative out there?

Thank you, 
Lukas Zwanenburg (NL)

My controller keeps losing connection to the wifi. Is there a way the app can send a notification when that occurs? 

Also, my smart watering program skipped the zones during this time. I thought if the controller was offline the programs would continue as  scheduledt? it would be nice to know why the program was skipped, like a diagnosis log of the errors.

Additionally, the controller randomly started the irrigation programs outside my set time peramerters. I'm afraid the controller is glitching out. I believe this all occured when the controller was disconnected from the internet. 

Ciao, è possibile ricevere delle notifiche push tutte le volte che parte l’irrigazione?

Grazie

I understand feature for setting rain delay, but would find it useful to adjust smart scheduling to say there was NO rain on a day it was forcasted. We have had >90 degreeF days and today smart schedule had rain as forcast, but we only had a trace - meaning the lawn needs irrigation but Smart is preventing/delaying it. I know I could increase the amount of rain threshold,  but it will still not correct for when that amount of rain has occured in the area - just not here.