Good day all,

in my zone #2 I set up a Magnolia tree.

If I remove the tree and set up lawn, the app apparently does it, but when I come back to check,  it mixes things up:

This seems to happen only with zone #2: how can I fix it and get rid of the Magnolia tree in this zone ? Does it affect my watering calendar ?

Thanks for help.

Davide

EDIT: wrong zone ID, correct is Zone #2

Hi all,

is there any way to force the app to use ENG language ? The ITA translation is sometimes really bad and puzzling...  

I can volunteer to tune up the translation if needed.

Best Regards,

Davide

My system is set to pause watering when below 7C. Currently it is 16/17C and my schedule is paused due to low temperature, why?

Hi,
I have a problem with the control unit, every few days I lose the connection to the Wifi.

If I restart the router,

Netro remains disconnected (blinks), I must necessarily turn off Netro and turn it back on to be able to reconnect it to the router.

This is a problem because if I'm away from home, I can't do it.

how can it be solved?

Hi 

After opening the app ( 3.0.1) 

it takes. sometimes. and random does not get online 

After shutting down apple smartphone … sometimes gets online sometimes not 

It seems that it connects correctly with my ipad 

I go to 'settings', location, and see OH United states.  the fields are protected and cannot be entered.  I go to the city I activate the samsung pass which enters the country Italy.  Save.  but when I return he did not save.  

I attach mp4 link

https://drive.google.com/file/d/1bhdM3LfRJ1OllTYUMGNNff1uxeMWQ071/view?usp=drivesdk

I try to setup station I’d for weather underground (IVALDE12). The app says invalid station id. Does any of you have a clue? 

It would be nice to assign the wire color for each zone in the app.  Doesn’t need to be prominent but maybe on the setting > zones screen.

Home display is correct and shows Last watering the day before at the date and time in the program (watering planned everyday) but under Discover many days are shown as if there has not been any irrigation.

What could be the reason why ?

I had to replace a Pixie and cannot add a sensor to the area of garden it irrigates. The Timer->Settings->Sensor contains no add button.    Android 12 on a Samsung S21, App version 3.0.1

What am I missing? 

I find the most of the time when I do a manual run, the station select get stuck on communicating….  I keep trying over a period of time and eventually one of the times I hit the Play button it goes straight to Watering and the manual run is successful.

Hi,

How do I set zone size for lawn areas sprinklers that overlap one and other?  For example, I have 6 zones, and in the front Zone 1 and Zone 2 overlap the areas they water in some cases.  So, in my case if the area covered by both zones is a total of 1000 feet, do I set each zone for 500 feet or each zone for 1000 feet.  Thanks.

May I reconfigure localization of my Netro Spark without reset the device? I have configured the device at home and now installed at my summer house many miles far away. Thanks.

The large male/female end of the Pixie cracked again after one season. Last time I had to buy an entire new one. Anyone make the custom looking part?

Nice to see improvements with end user in mind. Love the simpler home screen. Found it totally easy to set program for new grass seed for remote site from my bed. I know I sound like an employee but I am really enjoying this app and product.

What is the easiest way to test run an individual sprinkler circuit with a Netro Sprite controller?

Is anyone else having a hard time getting this thing to work? I purchased a Pixie to automate watering my tomato plants in a small garden bed, but so far it's been beyond frustrating.

The app either shows the Pixie on standby or offline,but it's clearly communicating with it... if I pull down to refresh, the green light on the Pixie starts to blink.

However, I just can't the Pixie to actually work as a timer. I set up a program with a watering schedule, but the Pixie doesn't listen to it, and it doesn't show up in the calendar. When I try to start manual watering through the app, the time is crossed out, and pressing play / start does nothing whatsoever.

The home screen is also super unhelpful and shows no past or scheduled watering times. The only way I have been able to get the Pixie to water is to walk up to the unit and press the button twice... but the app doesn't register those either.

What am I missing? Unfortunately, the Pixie manual doeant explain the app at all. Is there a new user guide somewhere that I haven't found?

Honestly, I haven't been as frustrated with a piece of tech in a long time, and am about to return it if I can't find a solution in the next few days.

Is there a way that Netro can allow 30 second waterings? This would allow Netro to be compatible with some of the tower gardens that use soil and have internal irrigation systems. 

How do I change the frequency of days watered and the amount of minutes watered for each zone.

Also, I cannot find manual run on my ipad.

How do I add a zone